Service list
Sprinkler Systems
New automated sprinkler systems and the repairs that keep them running, for homes and businesses across Dallas and North Texas. No job is too big or too small.
Where a sprinkler system fails first
Most sprinkler problems announce themselves as a brown patch, a geyser by the curb, or a zone that never comes on. Behind each one is usually a short list of suspects: a timer that lost its program, a head that got clipped by a mower, a pipe or fitting that cracked, a valve that stuck, or a wire a shovel cut while someone planted a tree.
Low pressure is the one people misread. A zone that only dribbles can be a leak, a half-open valve or a clogged head, and guessing wrong means paying for the wrong part. That is why a repair visit starts with finding out, not with replacing things.
Illustrative image of a row of spray heads along a lawn and bed edge.
How Precision works through a system
The visit follows the zones one at a time. Coverage and operation are checked at every head, low-pressure problems are diagnosed, cut wires are detected and repaired, and valves are located, repaired or replaced. Timers and clocks are repaired or replaced, and broken heads, pipes and fittings are swapped out.
Rain and freeze sensors matter more than most owners think. Precision installs and repairs automatic rain-freeze sensors, so the system stops watering when the weather has already done the job.
New automated systems, residential or commercial, are designed head to head, and that standard is what we repair back to.
Winterizing and spring setup
North Texas does not freeze every week, but it freezes often enough to crack fittings and exposed pipe. Winterizing the system, the blow-out, clears the water out of the lines before that happens.
In spring the same system gets set up again: zones run, heads checked, the controller programmed for the season. A property in Plano, Frisco or McKinney that gets this done once a year rarely has a surprise in July.
New systems of any size
Precision installs new automated sprinkler systems for homes, businesses and larger commercial grounds. No job is too big or too small, and every new installation carries a 3-year written warranty from a Texas licensed irrigator.
Call (469) 534-1100 for a free estimate. The office replies to every inquiry within 24 hours.
Texas licensed irrigator 16502, 25+ years serving Dallas, and a 3-year written warranty on new installations.
SERVICE SHEET
Ten things checked on a sprinkler visit
“We are happy we chose this company for our sprinkler system.”
Not sure which item on the list is your problem? Describe it to the office and we will tell you what the fix involves. For a whole-yard design, see Irrigation Installation.
Broken parts
- Repair or replace timers and clocks
- Replace broken sprinkler heads
- Repair broken pipes and fittings
- Install or repair automatic rain and freeze sensors
Diagnosis
- Check coverage and zone operation at all heads
- Diagnose low-pressure problems
- Detect and repair cut sprinkler wires
- Locate, repair or replace valves
The seasons
- Winterize the system (blow out the lines)
- System setup for spring